Install an OS from a .vmdk image in VMware Fusion, OS X vmdk

    VMware Fusion plays nicely with the Virtual Machine Disk format (.vmdk) seeing as its a spin off of its enterprise VMware software like VMware Workstation.

    You can mount vmdk preinstalled images in VMware but you can also install from vmdk images. In this example, I have a OS X 10.7 Lion Installer Disk .vmdk and VMware Fusion 7. These instructions should be OS agnostic and the process hasn’t changed in VMware Fusion 8 to my knowledge.  

    These steps can be mimicked using other operating systems, in fact only step 9 differs when using Ubuntu or Windows.

    First MAKE A COPY OF YOUR VMDK as VMware Fusion can break your install disk image. Once you have a copy to work from, launch VMware Fusion and select create new virtual machine.

    Now let’s begin…

    image

    1) Select More Options from the lower right hand corner.

    image

    2) Select create custom virtual machine

    image

    3) Select the version of the OS you are installing, (I’m using OS X 10.7) and create the image.

    image

    4) Select “Use an existing virtual disk” and click “chose Virtual disk…” to locate your disk image. VMware Fusion will create a dummy Virtual Machine for you to save. 

    image

    5) Once created, you should see your VM’s window, select the configuration options (the wrench icon on the far left)

    image

    6) Select “Add Device” and then “New Hard Drive”

    image

    7) Configure your new hard drive disk image and confirm that its in your device list under the “Removable Devices” on your settings panel.

    8) Boot the virtual machine.

    image

    9) You’ll need need to partition your virtual machine’s space from the installer. In OS X, this is located under the Disk Utility. Click the Erase and setup up the volume with HFS+ journaled.

    For other operating systems, you’ll need to use the installer’s utility to properly format the blank volume to a format compatible with the operating system in question. 

    image

    10) Now you can begin installing as you have a volume to install from!

    image

    11) Wait… once installed, your VM will reboot, but will relaunch with the installer CD.  You’ll need to shut down the VMware machine.

    image

    12) Go to your settings for the VM, and select the Startup Disk and select your new volume.

    image

    13) You’ll need to remove the Installer disk. Click on the Hard Disk, and select the advance options and select “Remove Hard Disk”

    Now you should be able to boot your Virtual Machine normally and use it.


    Resolving - because its extensions are not built try gem prisitine for sass

    Resolving - because its extensions are not built. Try: gem pristine - for Sass

    You may see this error when compiling with Sass or Compass, in CodeKit or Grunt or otherwise: 

    Usually it’s a result of a bad compile, and you’re seeing this instead of a helpful error log. 

    Ignoring fast-stemmer-1.0.2 because its extensions are not built. Try: gem pristine fast-stemmer-1.0.2
    Ignoring hitimes-1.2.2 because its extensions are not built. Try: gem pristine hitimes-1.2.2
    Ignoring posix-spawn-0.3.9 because its extensions are not built. Try: gem pristine posix-spawn-0.3.9
    Ignoring redcarpet-3.1.2 because its extensions are not built. Try: gem pristine redcarpet-3.1.2
    Ignoring redcarpet-2.3.0 because its extensions are not built. Try: gem pristine redcarpet-2.3.0
    Ignoring yajl-ruby-1.1.0 because its extensions are not built. Try: gem pristine yajl-ruby-1.1.0

    Fire up a terminal window and try the following:

    compass version

    Likely you will see the error echoed the same as your failed compile. You’ll need to resolve these using a simple terminal gem pristine

    In your terminal, you’ll need to resolve each of the following errors individual.

    Example:

    For the first error you’d need correct the install, so you’ll want to run

    Ignoring fast-stremmer-1.0.2 because its extensions are not built. Try: gem pristine fast-stemmer-1.0.2 

    From the terminal  run:

    sudo gem pristine fast-stemmer

    This will for the rebuild the gem install and resolve that particular error. You’ll need to repeat this for each individual instance of the gem pristine error.

    Each built should look something like the following.

    mycomputer:username$ sudo  gem pristine hitimes

    Restoring gems to pristine condition...

    Building native extensions.  This could take a while...

    Restored hitimes-1.2.2

    Now you should be able to continue compiling Compass.


    Net Neutrality is free speech

    If you need a primer for what/how net neutrality affects you, the most eloquent explination comes from none other than Matt Inman of the The Oatmeal fame.

     The success and protection of the internet hinges on how successfully proponents of a free and open web can frame their argument. The argument can be boiled down, refined and distilled to:

    Net Neutrality is free speech.

    Opposing it is censorship.


    Ditching Helvetica for 10.10 Yosemite, switching back to Lucida Grande

    I’m not the only one it seems that isn’t fond of Helvetica Neue for my OS font. 

    Despite its grand reputation, Helvetica can’t do everything. It works well in big sizes, but it can be really weak in small sizes. Shapes like ‘C’ and ‘S’ curl back into themselves, leaving tight “apertures”–the channels of white between a letter’s interior and exterior. So each shape halts the eye again and again, rather than ushering it along the line. The lowercase ‘e,’ the most common letter in English and many other languages, takes an especially unobliging form. These and other letters can be a pixel away from being some other letter, and we’re left to deal with flickers of doubt as we read.  - Tobias Frere-Jones

    And while we’re on the subject of screens, sure, type legibility across the board is going to get better with the advances in Retina displays. But until everyone has Retina displays, you’re going to have a lot of squinty, frustrated Apple users. Helvetica is just not fun to read at small sizes—in books, on posters, or on iPads—and it never will be. - Gizmodo

    Lucida Grande despite the designer bitch-fest was a workhorse font, akin to monospace fonts like Courier. While Helvetica has its place in design, it’s an inferior font at small type faces, retina display be damned. 

    image

    Pictured: Yosemite search using Lucida Grande. Lucida Grande may not be the end all, be all of typography but its legibility is superb at smaller resolutions

    Fortunately for those of us addicted Lucida Grande or at least feel that its a superior option for onscreen legibility, there’s a fix for that. Lucida Grande

    Simply download and install the zip from github and run the application. Reboot and you’re back to running Yosemite (tested on the public release) with Lucida Grande.  


    Intermission.

    Even though I was playing lots of games, I still didn’t call myself a “gamer” because I had associated that term with the games I wasn’t playing — instead of all the ones I was playing. This was largely because I’d bought into the myth that to be a “real gamer,” you had to be playing testosterone-infused blockbuster franchises like Grand Theft Auto, God of War or Call of Duty.

    Anita Sarkeesian, It’s Game Over for ‘Gamers’

    I couldn’t agree more with her, I ran a very popular cheat code websites for years, PS2cheats.com (No longer under my control) for 7 years. The website made me enough income that I never had to hold down another job during my long duration of college… and yet, I distanced myself from gaming and the term “gamer” during that time, back in the early 2000s. Gamer culture embarrassed me to the degree that I wouldn’t even mention my popular website in person in causal conversation despite having serious “gamer” credentials. I did not want to be associated with videogames, and nearly stopped playing them. Even today, I don’t talk about videogames with many people outside of a select few people . I avoid gaming as a topic for this blog despite owing my current job as a front end web developer directly to gaming . PS2cheats is where wrote my JS script, my first CSS line, and switched to writing HTML by hand.

    image

    Wayback machine of Version 4 of PS2cheats.com, 

    When my Xbox 360 experienced the Red Ring of Death, I didn’t bother to replace it. I spent 3 years without a game console besides my iPhone and my Mac. The games I played were iOS games like Zen Bound, Plants vs Zombies, Triazzle, Spider and games ported to the Mac such as Portal 1 & 2, Borderlands (with friends) and indie games like World of Goo, Crayon Physics, and Thomas Was Alone.

    For my birthday my brother bought me a PS3, and I rediscovered gaming That Game Company’s Flower and Journey games and Naughty Dog’s The Last of Us reminded me that there still could be a mass market for games willing to break the boundaries and narrow confines that appeal to a certain demographic. I still enjoy games but I couldn’t give a royal damn about being a gamer. I even celebrate the death “gamer” as it means that gaming is no longer an activity owned by testosterone-driven white male gamer. I live in an age where mom plays more videogames on her iPad than I do.

    The worst part is, I suspect a good portion of the #gamergate community are 80s children such as myself. I grew up, and its time my games did too. Hats off to Anita Sarkeesian, keep fighting the good fight.

    Now back to our regular program of web development, Apple tidbits and digital audio…


    Walmart.com lists “Dead Children” for sale and other faux controversies

    I never thought I’d be defending Walmart or any other oligopsony in a blog post, but here I go…

    image

    Pictured:  Widely distributed screenshot used as evidence of Walmart’s “Fat Girl Costumes”.

    The Orlando Sentinel ran the following story.

     Despite growing complaints on Twitter, Walmart has yet to remove a section for “fat girl costumes” on its website.

    The plus-size Halloween costume section was first pointed out by Kristyn Washburn who tweeted the corporation with her complaint on Tuesday.

    Gawker owned Jeezebel.com added fuel the fire with its own speculation.

    As of this morning, the Fat Girl section is still up; it features a lot of the same outfits as the Women’s Plus Size Adult section, which makes us think some web developer created the section as a “hilarious” joke and then neglected to change it.

    CNN reports Walmart even apologized.

    Walmart found itself sending apology tweet after apology tweet Monday after the Twitterverse raked it over the coals for a major goof on its website.

    For whatever inexplicable reason, the retail giant’s site featured a Halloween category, titled “Fat Girl Costumes.”

    You won’t find it there now, thank goodness, but it stayed there for a large part of the morning – and long enough for multiple screen grabs.

    The real story

    As much as I object Walmart for any number of ethical, moral, economic and staggering number of other reasons, this story is too good to be true. This is one crime that Walmart isn’t guilty of. Allow me to illustrate.

    Note the URL being presented in the article:

    http://www.walmart.com/c/kp/fat-girl-costumes

    “Fat-girl-costumes” is simply a search string. Many websites place queries as human readable strings into URLs for search engine optimization (SEO) and for human legibility. This is further evidenced (in the screenshot above) that this is a search query as there isn’t a gender selected on the left hand side. When I tested this myself, I was presented with a mish-mash of adult costumes, plus and regular sized.

    Due to my decent level of technical proficiency, I knew intrinsically that I could manipulate the values used.  With this bit of knowledge, I easily created my own  Walmart listing. In the sake of faux-moral outrage, I decided to make my own morally reprehensible URL.

    http://www.walmart.com/c/kp/dead-children

    Clicking it will take you to a search page, simply clear out the address bar, click a department, take a screenshot and you now have evidence of Walmart’s support of Dead Children!

    image

    Pictured: An undoctored/unphotoshopped screenshot.

    Social media as evidence…

    The fun doesn’t stop there. You can even take this to Facebook as further proof. Using my faux controversy URL,  http://www.walmart.com/c/kp/dead-children, watch what happens when I post a link to it on FaceBook:

    image

    Pictured: Edited out last names, but otherwise undoctored.

    It’s complete with an auto-generated thumbnail of a pixie-goth girl(?), and a note “shop for dead children”, and as a bonus, my mom approves! Clearly Walmart supports selling dead children (and my family has no moral compass), right? 

    What’s happening with Facebook?

    Web pages contain various bits of data, known as OpenGraph tags, that are used to assist popular social media sites with previews and to prune for other data.

    On massive websites like Walmart, Amazon, BestBuy (just to name a few) logically/algorithmic determined data automatically populate these tags within a webpage for social networks as it’d be unsustainable to create each of these by hand. The data used on my FaceBook Post simply was Walmart’s best guess for “Dead Children”.  Computer algorithms have no morality.

    We can explicitly disallow combinations of words in a search field, like the famous, nearly decade old, 1,121 banned NFL Jersey names (warning adult language), but even then the algorithm and logic is not making  moral call. It is simply checking the jersey name against a list of predefined words and rules that a human concocted list.  (Funfact: my last name is on the list of banned from Nike+ ID  thanks to yuppie-clothing-line Gant). It’s up to humans to make filters in the computer logic that defines our sense of morality (or sense of intellectual property law in the case of my last name).

    Walmart appears to have no such filter, and thus (much like Amazon) can be searched for any string of words you can conjure. You’ll be surprised, as you’ll continue get search results even with vulgar words. You’re probably thinking “Why on earth would they allow this?” In Walmart’s (and especially Amazon’s) case, they carry massive amounts of books, music and movies, some of which have raunchy titles or cover explicit subject matter. Art often ventures into dark subject matters, be it sexism, racism, slavery, prostitution and so forth. The movie “12 years a slave” may come off as crass without any context, and I can’t even begin to list how many great works of music have crass album titles. Censoring search terms would potentially unintentionally obfuscate access to many movies and books, which in Walmart and Amazon’s case, would equate to lost profits. Walmart isn’t a great patron of the arts (even if Walton’s own a gallery) but it loves money. 

    While guilty of many things, Walmart isn’t guilty of creating “Fat girl costumes” as a bad joke as Jezebel suggested above. Rather, its logic matched easily “girl” and “costume” and generated a webpage, complete with title, much akin to my “dead children” example. Walmart isn’t the first to be hit with controversial product listings. Amazon last year was swamped with outrage over a seller who auto-generated thousands of unclever variations of “Keep Calm” shirts. At least in the case of Amazon, the products were real. This isn’t. There are plenty of reasons to dislike Walmart but this isn’t one of them.


    CodeKit - Error - File to import not found or unreadable

    image

    Seeing a message that reads something like the following?:

    Error: File to import not found or unreadable: normalize-version.
    Load paths:
    /yourpath/to/yourstyles.scss
    Sass::Globbing::Importer
    on line 10 of /yourpath/to/yourstyles.scss
    Use --trace for backtrace.

    Usually you’ll encounter this from a gem installed library, my current example I’m using Compass Normalize.css, which requires Compass.  There’s quite a few globs out there that require Compass to run that aren’t bundled as bower components but rather Ruby gems. 

    First make sure your have compass installed on your Codekit project, you can see this in your project list.

    image

    If you do not see Compass listed, right click on your project and  select "Edit Project Settings" on your project in question. Scroll down to the Frameworks and click “Install Compass”, make sure your paths are accurate before proceeding.

    image

    If you’re still seeing problems, you may need to swap your Sass compiler. 

    Happy Coding!


    Using the iOS Simulator in Xcode 6 - 7 for web development

    I’m revisiting one of my more popular posts, Using Xcode iPhone Simulator to Develop Mobile websites, which is nice but a little out of date. 

    You’ll need to download and install Xcode for OS X to access the iOS simulator. Xcode is a free download from the Mac App store. 

    Updated: 11/22/15

    Xcode 7 has been out for awhile now, and these instructions are still valid but a new user may not realize that. I’ve since updated the instructions to reflect this. I added instructions on how to download different iOS versions.

    image

    How to launch the iOS simulator

    Launch Xcode (you may need to agree to Apple’s terms and conditions and wait as it installs component if its your first launch).

    image

    Once launched either right click the icon in dock or locate it from the Open Developer Tool located under Xcode.

    image

    Protip: Once launched, you can permanently position the iOS simulator in your dock and skip Xcode altogether.  You can quit Xcode and the iOS simulator will stay launched

    Copy and Paste!

    You can copy and paste text into the iOS Simulator which requires tediously hitting paste on the open simulator window, then tapping and holding and pasting using the simulator itself. However if you hit command-v (paste) then command-shift-V you can directly paste text into text fields. It’s extremely handy for URLs.

    Inspect Element

    Launch Safari on your computer and go to settings and to “Advanced”

    image

    Make sure show Development menu is checked. 

    Launch your iOS Simulator, and fire up safari and go to the web page you’d like to perform inspect element/ use the javascript console on.

    Go back to Safari and click on the development and select your iOS simulator you’d like to inspect.

    image

    Protip: you’ll need to likely have the latest version of Safari to pair with Xcode, be sure you have all the latest OS X updates installed.  If you still can’t connect, try quitting Safari and relaunching followed the iOS simulator. The connection can  be finicky. If I’ve had my Mac Pro or MacBook Retina open for days on end,  sometimes a full reboot is the only way to fix the connection.

    Also, the Simulator is 99% accurate but I have had on rare occasion render issues on hardware that did not occur in the simulator. It pays to do actual hardware tests for UI interactions as its where you’re most likely to see differences.

    Pinch and Zoom

    Hold the option key to bring up the finger pads. By default the zoom behavior will be on the center of the screen. Hold Shift-Option to recenter the zoom. Release the shift key to zoom.

    Launch iOS Simulator from the Terminal

    From the console, paste:

    open -a /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneSimulator.platform/Developer/Applications/iPhone\ Simulator.app

    Protip: you can create aliases to the iOS simulator.app. Right clicking Xcode and using “Show packages” following the path outlined above will allow you to see the actual application.  Also, due to El Capitan’s user restrictions, by default this will no longer work 

    Drag and Drop in Simulator

    image

    Like most things in OS X, you can drag and drop files directly to your iOS simulator (images, webpages, PDF, anything that Safari supports). If you’re looking to serve static assets off a local workspace, it works in a pinch. 

    Protip: You can save images to the Photos app in the iOS Simulator. Drag an image over, and then save from Safari. You can test file uploads this way.

    Download different iOS versions

    Under the preferences, you can download alternate iOS versions to use with your iOS simulator. As a general rule, Apple will allow you to download the previous iOS the current version of Xcode.

    As a front end web developer, the .x releases tend to be pretty indistinguishable. Usually you’ll only need one version of the previous OS, rather than each 8.x iteration.  

    Keep Xcode 5 for iOS 6 testing

    Simply rename Xcode 5 before updating to keep your old version. You already updated and still need iOS6? I wrote a post detailing on how to download Xcode 5 if you already updated.

    Don’t forget Android…

    Do you wish you had the same awesome simulator for Android like iOS? See my post on GenyMotion, an alternative to using the dog-slow simulator bundled in the Android SDK.


    Recommended Mac Pro upgrades & hacks

    04/11/18




    IMPORTANT: Rather than re-edit this page, I've created a new guide, called "The Definitive Classic Mac Pro Upgrade Guide" which is a larger, more in-depth, easier to read, organized list of Mac Pro upgrades, aiming to encompass all the potential upgrades for the classic Mac Pros. I highly recommend reading it, as many upgrades (like NVMe storage, Audio over HDMI, PowerSupply mods etc) simply not discussed here.

    For posterity, below you'll find the original guide that was maintained until roughly 04/17.




    I originally wrote this in August of 2013 and it still remains one of the most read items on my blog (I've finally as of mid-April started the signifcant task of actually editing down this post with out of date information and cleaning it up). Like my Mac Pro, I’ve continually updated this page and will continue to do so until my Mac Pro retires.

    My opinion of the redesigned Mac Pro still remains negative as used a heavily upgraded 2008 Mac Pro 10 years only to upgrade to a Westmere Mac Pro in 2018, waiting for the mythical return to modular computing. That said, the fact 10+ years later my Mac Pro remains a viable computer is a testament both how well engineered the Mac Pro was, and to the benefits modular computer design.

    While Apple overthinks its new Mac Pro, we're stuck in limbo.

    Whether you may have economical reasons or a disdain for the new less upgradable/hackable Mac Pro, this guide seeks to illustrate upgrades that are feasible upgrades beyond your typical RAM and Hard drive upgrades.

    Please, contact me if there’s anything I’m missing.

    – Greg

    image

    Image Source: Danish tech blog, Giga.de, lampooning the new Mac Pro

    The Guide:

    So you have a Mac Pro and perhaps the latest Mac Pro isn’t exactly what you’re hoping for… It wasn’t for me.

    image

    Screenshot from WWDC. The 2013 Mac Pro doesn’t leave much for upgrades.

    Thanks to the wonders of upgrades and hacks, any Mac Pro is still a viable box, some more so than others. You can always upgrade the RAM and the HDDs, but there’s plenty more interesting upgrades you can do, and most on the cheap. You’d be surprised at the performance a 2008 Mac Pro has in GTA V.

    Notably RAM isn’t getting cheaper and if you’re not running 16 GB+ of RAM, you’re missing out on one of the best features of the Mac Pros, the ability to have more than 16 GB of ram. Apple has yet to make a laptop support greater than 16 GB of RAM and only very recently have the iMacs been able to support up to 32 GB of RAM.

    Upgrade #1: OS X 10.9+ 2006 Mac Pros and 10.13+ 2008 Mac Pros

    image

    Photo Credit: Apple Inc

    Cost: $0

    Effort Level: Moderate

    This is a “Well duh” upgrade, except for 2006 - 2008 Mac Pro owners, which are officially unsupported, but when has official really been a barrier? You can install 10.8+ on unsupported Macs (2006 Macs are capped lower than 2008 Mac Pros). 2006 Follow the guide here.

    Mavericks even on an old Mac Pro breathes new life into 2006 Mac Pros thanks to much better memory management and Grand Central. Mac Pro 2008 Mac Pros can install macOS High Sierra using macOS High Sierra Patcher Tool for Unsupported Macs tool.

    Upgrade #2: USB 3.0 or 3.1c PCIe card

    image

    Photo Credit: amazon.com

    Cost: $20-40 for USB 3.0, $50-60 for USB 3.1c

    Effort Level: Minimal

    At the top of the list comes USB 3.0 as its cheap and effective. USB 3.1 is more "optional" as the plethora of devices still aren't USB 3.1c

    USB 3.0 isn’t the newest kid on the block, but you’ll never be able to add Thunderbolt via upgrades. USB 3.0 is nearly the speed of eSATA and USB 3.1c is much faster. Sonnet's Allegro USB-C PCIe is a safe choice for USB 3.1 seekers. Sadly, there is not and will not be any Thunderbolt card for the Mac Pro as the Alpine Ridge thunderbolt cards are motherboard specific.

    For as little as $18, you can add USB 3.0 to any Mac Pro (running 10.8.3). It’ll take some hackage, as you’ll need to provide Molex power to the PCI chamber. With the 2006/2008 Mac Pros, you can easily feed off the Molex power cable in the optical drive. 2010 Mac Pro owners will need to get a SATA Power to Molex Power Adapter

    Note: Sonnet (Long time Mac hardware/upgrade manufacturer) also sells USB 3.0, more spendy but they carry the trust that comes with the Sonnet name. There’s others on the market, I recommend Macrumor’s forums.

    Upgrade #3 Make your own Fusion drive by installing an SSD

    image

    Cost: $100-$700 (SSDs prices are vary greatly based on make/size).

    Effort Level: Significant

    Yes, SSD is the future. Most modern SSDs are as reliable as HDDs (initially they weren’t).

    Installing an SSD might not be as straight forward as you think. Most SSDs are 2.5 inch, the Mac Pro drive bases are 5.25 inch for optical and 3.5 inch for HDDs.

    In 2009+ Mac Pros, installing a SSD is a breeze. The same guide recommends using the 2 extra SATA ports on the 2006-2008 Mac Pros, although the much easier option is to get a replacement sled that’s matched for your Mac Pro’s drive bays (assuming you have a drive bay free) or you can get the icy dock or the OWC Multi-Mount. (See upgrade #5).

    Anandtech liked the Fusion drive but lamented its rather measly 128 GB. But did you know you can make your own fusion drive and you can make it bigger? In fact, You can make one with any older Mac.

    Follow the guide here.

    Note: 10/14/14 update

    … Skipping the Fusion Drive probably is a more viable option as 1 TB SSDs entered below the $500 mark some time ago. I skipped the Fusion drive for a 750 GB SSD last year. The Mac Pros are SATA2 only so you won’t be making full use of the SSD without a SATA3 card, see upgrade #6 for more details.

    Upgrade #4: nVidia GeForce 700 through 1000 - (And any GTX 7xx & GTX-9xx & 10xx)

    image

    Photo Credit: Amazon.com

    Cost: Graphics cards are in constant flux thanks to bit coins

    Effort Level: Mild (Not difficult but ac Pros require 8 pin power adapters)

    Did you know that nVidia has OS X drivers for its cards? When I originally wrote this guide 4 years ago, this was surprising fact for many users. I tested a GeForce 760 Hackintosh vs it my Mac Pro, outlined the installation process 2008 Mac Pro Full Instructions and benchmarks here. It was quite capable of playing GTA V at mostly high settings (limited mostly by VRAM) at 2560 x 1440.

    Don't take my word for it, there's plenty of Amazon reviews with the 760 Check the Amazon reviews or youtubers jam a 970 in a Mac Protip.

    I've since posted a guide for the GeForce GTX 1060 in Mac Pro 2010.

    The GeForce drivers now support the latest GPUs, but you'll need the latest OS X. With GPU prices in flux, it'll be an expensive upgrade but one of the best ways to extend your life. Also to enable High Resolutions @60hz and HiDPI fix, you may need the Mac Pixel Clock patch

    Upgrade #4: Flash an AMD (Formerly ATI) Radeon 6870 or 6970

    image

    Photo Credit: Amazon.com

    (I’m leaving this up for posterit and history's sake, as the information is still valid although the nVidia route is the superior option) and the latest ATI cards now support dual roms.

    Cost: $?

    Effort Level: Moderate (Not difficult but requires patience locate an EFI rom and careful reading)

    Mac graphics cards are really expensive, but fortunately with a little TLC you can flash Radeon 6870s and 6970s in your Mac Pro, I retired my GeForce 8800 GT a year ago and haven’t regretted it. Out of the box, the 6870s will output picture after fully booting. However, you’ll get some weird issues (Quicktime does not work, games may not work, mac will not output video via graphics card until fully booted). To correct this, you’ll need to flash the firmware with the Mac rom for full EFI compatibility.

    Don’t worry, it’ll still work great in in Windows. However, the Mac roms usually only support 3 video outputs so be prepared that likely one of the DVI ports will be rendered unsupported. You’ll be limited to driving 3 monitors instead of 4. :)

    What you’ll need:

    If you’re too hesitant and have deep pockets, there’s always the Mac EVGA Geforce GTX 680.

    Upgrade #5: Make use of your unused (semi-hidden) SATA Ports

    Cost: $15-50

    Effort Level: Moderate

    image

    Photo Credit: macsales.com

    The 2006-2008 Mac Pros have two hidden unused SATA ports, likely designed to supply the optical bays with SATA ports.

    image

    Photo Credit: macsales.com

    You can easily turn these into eSATA ports with simple PCI plate upgrades with a generic internal to external eSATA port or Newer Tech’s package, designed for the Mac Pro.

    image

    Photo Credit: macsales.com

    If eSATA isn’t your style, you can easily add in two more drives into your free 5.25 drive bay using a OWC Multi-Mount

    Photo Credit: macsales.com

    Upgrade #6: Turbo speed your storage: Use PCIe Storage or Upgrade to SATA3 for SSD

    image

    Photo Credit: macsales.com

    Cost $100-1000

    Effort Level: Minimal to Moderate depending on choice

    The latest MacBook Airs and the upcoming Mac Pro boast PCIe storage. Its oodles faster than SATA and every Mac Pro 2006-2012 is limited to SATA2… but don’t think you’re exactly limited. There's a few vectors and all involve a PCIe card.

    The fastest are PCIe cards that are chassis for PCIe SSDs, these are cards that house the same storage format found on laptops. Some cards can house two cards together in a RAID configuration, and thus deliver truly blistering performance. These are at the extreme end, and deliver 2 GBs per second according the benches. There's also the singular PCIe Mercury Accelsior E2 by OWC which provides a single slot and two eSATA ports.

    Next up is the considerably less expensive option: PCIe to SATA3 housing units. Sonnet makes the dual Sonnet Tempo SSD Pro Plus which has two internal SSD mounts and two external eSATA III ports for Soft raid support, getting speeds to the 1 GB per second range, B&H carries the card for around $250 as of writing this in early 2018. Both OWC Accelsior S PCIe Adapter can house a single SSD drive, ranging from $50 to $90.

    The cheaper route is to get a bootable SATA3 card. Sadly the 2006 - 2012 Mac Pros never saw internal SATA3, and cap at SATA2′s 300 MB/s. Also, see the a friendly MacRumors poster’s guide for more card options and mounting options.

    With the Samsung 850 models hovering around 500+ MB/s a second, going to SATA 3 for many SSDs will nearly double the the sustained reads/writes over using internal SATA 2.

    Upgrade #7: Macs Fan Control

    image

    Effort Level: Minimal

    Cost: $0

    Why does Macs Fan Control count as an upgrade?

    My Mac Pro has always had a fan glitch where my Mac goes into leaf blower mode under any distress.

    Having used it to record two full length LPs, this has been rather problematic. However, you can bypass the thermometers default settings using Macs Fan Control. The Mac Pros have an impressive amount of fan chambers, and if your Mac is overly sensitive, you can easily reduce the Fan RPMs using temperature ranges for different zones. Also as a major bonus, there’s even a Windows version that lets you turn down your fans when booting Windows 7-8.

    Its been a life saver for me, although if you’re not careful you can damage your computer. Just keep an eye on the temperatures and learn what’s normal. I’ve been using it for years now, and its my Mac Pro no longer runs in leaf blower mode while playing games in Windows. I can’t recommend it enough.

    Download it here.

    Upgrade #8: Upgrade your CPUs

    Effort Level: Significant

    Cost: $80-$400

    There are guides you can follow like the Anandtech one linked here and everymac has a lot of great info. Any oldschool PC user probably isn’t afraid of a little thermal paste. Its not the most difficult (swapping out a busted flat panel on a MacBook requires more nimble fingers) but its not for the faint of heart or the shallow of wallet.

    Mac Pro 2006s can rock 8 Core Clovertowns, you’ll just need need a Socket 771 Xeon CPU, and if you find the right place, for as little you can go from 4 to 8 CPUs for as little as $80 total. The 2006 Mac Pro makes for a very compelling upgrade, and there’s plenty of guides for it.

    The upgrade options become a lot less compelling for the 2008 Mac Pro which the base model largely was octo-core. For, one could go from 2.8 GHz to 3.0 Ghz, but there isn’t much room for upgrades as the best CPU for the LGA771 is the X5492 (with the improve 1600 Mhz FSB), the few places that carry them run over

    NOTE: 2009 Mac Pros can accept the same CPUs as a 2010 CPU with a firmware hack, see below

    The 2010/2012 Mac Pros have more flexibility ranging from 6, 10 and 12 core configurations, there is a model difference between the Nehalem 2010 Mac Pros, and Westmere, EveryMac has a nice guide. Jamming two X5690 CPUs into a Westmere 2010/2012 Mac can yield very impressive benchmarks. Some crazy bastards have overclocked them to 4 GHz. Even the 2009 Mac with the X5690 is beast. Compare it to the 12 core 2013 Mac Pro. The X5690 aces it in multi-core and then some. It takes the iMac Pro of 2017 to best the multicore scores of the mighty X5690.

    Recommend Reading:

    EveryMac - 2008 Mac Pro CPU Upgrade

    EveryMac - 2009 Mac Pro CPU Upgrade

    EveryMac - 2010/2012 Mac Pro CPU Upgrade

    Mac Pro CPU by model compatibility list

    Upgrade #9: Go 4k!

    image

    Image Credit: wikipedia.com

    Effort level: Minimal with a few cavaets

    Cost: $300-1200

    While you won’t be able to attain the amazing 5k resolution of the iMac without breaking the bank, you can come relatively close with your aging Mac Pro with 4k.

    There’s a few things to understand right out of the gate, First thing first, need a graphics card that’s 4k compatibe

    Second, you’ll need 10.9.3+ for the UI scaling installed for UI scaling, otherwise be prepared to squint.

    Third, you’ll need a 4k Display.

    Sounds easy right? You need to carefully consider your purchase as not all 4k displays are equal. Some older low end 4k displays are 30 Hz only. This means you’ll get a maximum of 30 FPS plus you may need to install a hack to get 60 Hz for Mac Pros.

    4k monitors can get qutie large but the trade off is pixel density to size...

    A 28 4k monitor is 157.35 PPI (Pixels per inch) which means in-between “retina” and “standard. Previously a higher end 27 inch display normally would carry a 2560 x 1440 resolution, for a grand total of 104.9 PPI. The iMac 5k has an incredible 218 PPI, nearly the same as the Retina MacBook Pros.

    Regardless of the screen size in your 4k display, it’ll be able to scale to plenty of relative sizes, based on your preferences.

    Upgrade #10: Go Wireless 802.11ac + Bluetooth 4.0!

    image

    Cost: <$100

    Effort Level: Moderate (Note: Installing Airport cards is exceptionally tedious due to the wireless connectors)

    Jealous of the latest Wifi speeds? Want continuity and handoff and Airdrop support? Don’t be, wireless AC cards can be had for the Mac Pro for your Airport card slot or PCIe. (Notably, for native 10.12+ support, 2008 Mac Pros need this upgrade).

    2006-2008 Mac Pro users can nab Apple Broadcom Bcm94360cd - 802.11 A/B/G/N/AC + Bluetooth 4.0.

    There’s also the Apple Broadcom Bcm94360cd - 802.11 A/B/G/N/AC for 2009, 2010-2012 Mac Pros.

    I can vouch too, they work great, check out my installation guide. There’s a few tips and tricks that’ll make your life easier.

    User’s looking for a simpler solution can nab The ASUS Dual-Band Wireless-AC1900 PCI-E Adapter can be had for under $100 and its Mac compatible.


    Upgrade #11: 2009 firmware flash to enable Westmere Xeon CPUs and faster ram

    This is one of those times times where a software upgrade makes all the difference.

    Ars Technica reported on the success of the 2009 Mac Pros being flashed by Netkas forum members, the same tribe of digital badasses who figured out how to flash ATI graphics cards before nVIdia did us a big favor and started loading its graphics cards with OS X compatible bios, and writing its own drivers.

    Notably this will not provide any improvements beyond enabling you to upgrade your CPUs and RAM.

    Cost: $0

    Upgrade #12: Hackintosh?

    Effort Level: Extreme

    Cost: $500-1500

    Hackintoshes are ever present but make for a very shaky OS X experience. You’ll be wading kext files and diving into the deep in the pool. I highly do not recommend it unless you’re a seasoned OS X user who’s not afraid of the terminal, and doesn’t mind waiting for major OS updates.

    How to tell if you’re right for a Hackintosh.

    • Use Bit Torrent
    • Use or have used another OS than OS X
    • Knowingly voided a warranty on a computer
    • Successfully wired a motherboard’s LED lights to a motherboard
    • Modified a PC’s Bios
    • Successfully troubleshooted a Mac suffering repeat Kernel Panics
    • Know what the phrase "Show Package Contents” in OS X means
    • Installed Kext files manually
    • sudo nanoed a plist or other OS file in OS X
    • Visited one of the websites: InsanelyMac, TonyMacX86, iATKOS, osx86project and already considered a Hackintosh prior to reading this list

    If you answer yes to all of the following questions, you just might be right for a Hackintosh.

    Having installed 10.5 on a Pentium-D system years ago and trying it out, it made me realize that a Hackintosh wasn’t a viable option for me at the time. It worked… (mostly) but the lack of stability was unnerving. I was stuck waiting on compatible updates, and the lack of graphic support made for a rough experience.

    In the spring of 2014 I got the Hackintosh bug again and tried the Hackintosh route and mostly succeeded.

    Protip: Experienced Linux users will be more adapted to working on Hackintosh problems that the average Mac user.

    Recommend Reading:

    LifeHacker’s guide is probably the best jump off point, followed by InsanelyMac and TonyMacX86.



    A Better Android Simulator for Web development- GenyMotion

    The Android SDK leaves something to desired for someone who just simply wants to use the <Simulator. Even after installing Intel® Hardware Accelerated Execution Manager (HAXM) for hardware-assisted virtualization for Atom based builds of Android (see the guide here), the performance is pretty “meh”.   Its pain, and as strictly aweb developer, the world of Eclipse is foreign.

    I discovered a gem that I’m surprised isn’t more widely touted… GenyMotion.

    image

    GenyMotion makes Android testing more than just tolerable

    So what is GenyMotion? GenyMotion essentially is tricked out version of VirtualBox designed for running multiple versions Android rather than running the <simulator in the Applet. This means full virtualization of the hardware and thus the <simulator is exponentially faster.

    Best of all, for the base version, its free (app devs will want the paid version).

    image

    Pictured: Screenshot of style guide from a site currently being developed running on GenyMotion

    Much akin to other virtual machines you can install multiples of Android, versions d 2.3, 4.1, 4.2, 4.3 an 4.4 currently being supported. 

    Inspect Element on Android!

    Its not immediately apparent that you can use an Android VM as a remote device for Chrome Inspect Element, but you can. It took a little digging but here’s the steps that it took to enable .

    To enable inspect element, you’ll need to install a recent version of Android, 4.4 (one that comes preinstalled with Chrome and not browser). 

    1. Go to Settings -> About Phone and scroll down.
    2. Locate the Build Number and Tap it 7 times 
    3. Go back to Settings 
    4. Go to Developer Options  and check USB Debugging
    5. Now on your host computer, go to Chrome and in the URL bar type chrome://devices/
    6. Locate your connected Android VM. Congrats, now you have Inspect Element, just like iOS (>better late than never right?)

    Note: Link to Google’s official instructions

    image

    Pictured: Screenshot of Chrome inspecting element of GenyMotion Android

    You’ll need to create an account to download GenyMotion, but the hassle is worth it.

    /edit

    Jan 29 15 update:

    Added link to Google’s instructions